Viesta DWP70 Manual De Instrucciones página 6

Version: 1.0
KEN001DW 21.07.2017
INSTALLATION
Step 3:
Drill a hole in the aluminum profile of the side element with a 3mm drill at the pre-drilled points in the profile.
Now take the washer and slide it onto the screw.
Now screw the screw into the aluminum profile and press the cover on it.
Place the seal (G) on a corner of the glass panel and press the seal onto the glass.
Carefully insert the glass panel into the aluminum profile.
E
D
G
[ EN ● 6 ]