Acson G6 Manual Del Usuario página 3

1. Transmission source
• The source where the signal will be transmitted.
2. Signal transmission indication
• Blink to confirm that the last setting has been transmitted to the unit.
3. Temperature setting
• To set the desired room temperature, press the TEMP + or TEMP – button to
increase or decrease the set temperature.
• The temperature setting range is from 16°C to 30°C (60°F to 80°F). Optional
setting 20°C to 30°C.
4. "ON/OFF" Button
• Press once to start the air conditioner unit.
• Press again to stop the unit.
5. Fan speed selection
• Press the FAN button continuously will toggle the fan speed in the following order:
• Stop pressing when the desired fan speed appears on the display screen.
6. Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL, DRY & FAN.
• For heat pump unit, the available modes are: AUTO, COOL, DRY, FAN & HEAT.
7. Timer setting
• Press the TIMER button will activate the delay timer function.
• The display screen will show the number of hours (1 to 15 hours) after which the
delay timer function will be executed.
• The air conditioner unit will automatically switch on or off after the set time,
depending on its current condition (on or off). For example, if you have set delay
time of 3 hours and the air conditioner unit is currently switched on, it will be
automatically switched off after 3 hours.
• To cancel the delay timer function, press the TIMER button until the number of
hours disappear from the screen.
• In case of someone press the ON/OFF button after a delay timer has been set, the
timer setting will be cleared. To activate the delay timer again, press the TIMER
button once again.
8. Sleep mode setting
• Press the SLEEP button will activate the sleep mode function.
• This is an energy saving option. When the unit is operating under cooling mode, the set
temperature is increased by 0.5°C after the first half an hour, 1°C after the second half
an hour and total of 2°C after the following 1 hour. This function will prevent excessive
cooling during summer season.
OM-G6-0200 (6 Langs)
OPERATING GUIDE
û û
Low ––– Med –––
2
û
High –––
Auto
2
2/1/01, 10:29 AM