First Start-Up Of The Equipment; First Start-Up And Configuration Of The Digital Target - MAHLE Digital ADAS 2.0 Manual De Instalación

36
Digital ADAS 2.0
Installation manual

8. First start-up of the equipment

8.1
First start-up and configu-
ration of the digital target
The first startup / configuration of
the Digital ADAS 2.0 system must
be done by the dealer.
First start-up and configuration of the
digital target
1 Connect the plug of the power cord of
the multiple socket to a Shuko 230V
50Hz electrical socket
2 Switch on the multiple socket using
the switch
Note: The Digital ADAS CPU should
switch on automatically, in case it
does not start, press its power button
3 Turn on the digital target with the
appropriate remote control
4 If required, select the desired lan-
guage and country
Note: Skip the connection of the
digital target to the internet
5 If required, view and accept the digital
target license agreement
6 Select the port to which the Digital
ADAS CPU is connected (normally it
is HDMI1)
7 Now move on to the configuration of
the Digital ADAS CPU