Step 1
• Twist 8" Foam Floats onto Bottom
Hoop Sections.
Step 2
• Place Tee Couplings on Bottom
Hoop Sections making sure that
pre-drilled holes face inside the
hoop (orient as shown).
Step 3
• Insert Uprights into Tees.
Step 4
• Secure bottom couplings and
uprights with Set Screws.
Step 5
• Locate the red dot that states 'Open End' to allow the net to be installed properly
by threading loops around the Top Hoop.
Thread Net on PVC Hoop.
1
This is the net right out of the package.
You will be working with the longer looped end.
2
This is a close-up of diagram 1.
This is one loop.
3
Fold the loop toward you, creating two loops.
4
Insert your nger through the two loops.
5
Release the thumb holding the loop in place and pull
on the two middle strings. The loop should slide up
and catch your ngers.
6
Take the loop from your nger and slide onto the
basketball hoop. Continue this process with each
loop until all loops are on the hoop.
Note: Visit poolmaster.com, search 72714 for net video instructions.
Step 6
• Insert top hoop couplings onto uprights and secure with set
screws (holes located on inside of hoop).
Step 7
• In ate game ball using Ball Needle and a hand pump (not included) to in ate Ball to "9"
diameter. Do not over in ate.
6
Set Screws
3
4
Set Screws
1
1
2
4
5
2
3
5
6
poolmaster.com
2