Assembly - GOK SmartBox MINI Instrucciones Para El Montaje Y Para El Uso

Menu step
Convex
Concave
Cylinder
> 50000 L
Steel Tank
Display Type
OnTouch
Permanent
Exit
Display type "Permanent" is recommended only for short times during battery operation.
After programming, the digital display is ready for "Set Null", the zero offset
adjustment with the FSA-E.

ASSEMBLY

Before assembly, check that the product is complete and has not suffered any damage during
transport. Installation, maintenance and start-up may only be carried out by companies that
are specialist companies for this work in terms of Section 62 of the German Ordinance on
Facilities Handling Substances Hazardous to Water (AwSV).
The specialised company and the operator must observe, comply with and understand all of
the following instructions in this assembly and operating manual.
For the system to function as intended, it must be installed professionally in compliance with
the technical rules applicable to the planning, construction and operation of the entire system.
These regulations also include the accident prevention regulations of the employers' liability
insurance associations, the VDE regulations, and the installation and operating instructions.
Installation instructions
The display unit has a wall installation housing and is operated with the top of the housing
closed. Installation and start-up by a specialised installer is carried out with the display unit
open.
Installation of the digital display unit
Use a suitable tool to pierce the openings.
28 900 50 a
Entry function
plastic battery tank, convex
slightly convex shape, alternative to linear
plastic battery tank, concave
slightly concave shape, alternative to linear
cylindrical large outdoor tank ˃50 m³; ˃50000 L to
100000 L
Sheet steel tank or tank battery
Straight side walls with semicircular dome at top and
bottom
Set the display
Select a setting and confirm with [Enter].
Ok is displayed. Value is displayed for a short time.
Select a setting and confirm with [Enter].
Ok is displayed. Continuous display
Programming completed
Do not damage electronic components.
SmartBox MINI
Entry value
Sleep mode
Continuous
display, sensor
not in operation
19 / 87