Product Overview; Installation; Technical Data; Cleaning, Care And Maintenance - F1 Creeper Seat CS500 Manual Del Usuario

GB
Produc t Over-
view
1. Main frame with seat
2. Lower frame with wheels
3. Bolts
4. Washers
5. Nuts
6. Tool trays
7. Slide-out
Ins tallation
1. Set all parts out on a level surface.
2. Place the main frame (1) with seat on the floor.
3. Place a lower frame with wheels (2) on the
main frame. The wheels must face outward.
4. Attach the lower frame to the main frame with
the bolts (3), washers (4) and nuts (5). The
nuts must be secured to the underside of the
main frame.
5. Attach the second lower frame the same way.
Be sure the locking wheels are on the same
side.
6. Tighten all bolts.
Attention!
Verify the lower frame is firmly secured to the
main frame.
7. Turn the device over and set it on its wheels.
8. Hold the tool tray (6) at a 45 degree angle and
insert the tool tray at the side of the main
frame. Push the tool tray down until it locks
into place.
9. Install the other tool tray the same way.
10. Insert the slide-out (7) in the main frame.
Tighten all fittings and verify the device is stable
before using it. Verify the wheels turn freely. If
the wheels lock, check if the bolts are tightened
evenly.
Warning!
Regularly inspect the device and tighten all bolts.
Clean the wheels and remove dirt from the wheel
bearings.
10 f1.mts-gruppe.com
Technic al
data
Model
Item number
Seat dimensions
Wheel diameter
Weight capacity
Cleaning, c are
and mainte-
nance
•
Clean the product with a soft, dry cloth.
•
Store the machine in a clean, dry place.
In the event of damage, repairs or other problems
regarding the product please contact the point of
sale or qualified specialist.

Service

Should you have any questions regarding com-
missioning or operating in spite of studying these
operating instructions, or if a problem should oc-
cur against all expectations, please get in contact
with your specialist supplier.

Disposal

The packaging consists of non-contaminating
materials that you can dispose of at your local
recycling point.
Illustrations may vary slightly from the product
itself. We reserve the right to modify the product
in accordance with technical advances. Decora-
tion not included.
CS500
10805
455 x 255 mm /
18 x 10 in
100 mm / 4 in
max. 120 kg