Lan Setup - BeeWi BWG200 Manual Del Usuario

8
Dial Number
User Name
Password
APN
DNS
SIM PIN
Click on Save/Reboot to make the new setup effective and wait until the
router has been rebooted before testing the connection.

3.1.2 LAN Setup

Configure the Router IP Address and Subnet Mask for LAN interface.
Click on Save/Reboot to make the new setup effective.
3.2 Wireless
3.2.1 Basic
This page allows you to enable or disable the wireless network, hide
network from active scans, set SSID wireless network name and restrict
channel set based on country requirements.
3.2.2 Security
This page allows you to configure security features of the wireless
LAN interface. You can set network authentication method, select data
encryption type WEP, WPA or WPA2, specify whether a network key is
required to authenticate to this wireless network and specify encryption
level.
The dial number provided by the ISP.
User name provided by the ISP.
Password provided by the ISP.
The Access Point Name provided by ISP.
The IP address of the Domain Name
System, you may leave it blank since the
value will be caught from the ISP.
PIN codes of the SIM card.