Step Two: Mounting the camera (optional)
1.
Use the mounting template to mark two holes for the screws.
2.
Drill holes using a 1/4" (6mm) drill bit. If mounting to masonry or
drywall, gently tap the anchors into the holes.
3.
Align the magnetic mounting plate with the drilled holes.
4.
Using a Philips screwdriver and two screws secure the magnetic
mounting plate in position.
5.
Place the camera base onto the magnetic mounting plate.
6.
Angle and rotate the camera's position as needed.
7.
Open the camera's settings in the app and enable Image Rotation
to flip the camera image.
6