Installation Information - DURAVIT Darling New 760246 Instrucciones De Montaje

Important information
Regarding the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
DANGER! At high risk of fatal hazards or serious
injuries
DVICE! In the case of potential damage to property
Link to the Electrical Installation section
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Indication of the temperature
Control unit
(Number depends on the whirl system)
Target group and qualification
The whirltub must only be installed by trained plumbing
engineers. The electrical installation may only be carried
out by qualified electricians.
NOTE! Local installation regulations and any country-
specific standards must be observed at all times.
Safety information
DANGER! Risk of fatal electric shock.
> Do NOT remove any whirltub components.
6
WH_M_Einbau_WV_Magnete/15.12.7
All manuals and user guides at all-guides.com

Installation information

Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NOTE!
If the tray has a base inlet, a pipe interrupt must always
be installed on-site.
> See installation diagram.
20
Technische Verbesserungen und optische VerŠnderungen an den abgebildeten Produkten behalten wir uns vor.
We reserve the right to make technical improvements and enhance the appearance of the products shown.
Gezeichnet
Drafted
GeprŸft
Certified
GeŠndert
Modified
22
Seitenansicht
Lateral view
Checking the whirl system (Diagram 20)
> Switch on the whirl system for 10 minutes:
run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the bathtub and wait 10 Datum Name Ma§stab Artikel-Nr.
Date Scale Model-No.
Name
08.10.13 1:20
Allgaier
minutes.
Bezeichnung
08.10.13 WLT 1:10 X
Description
> Check to make sure that it is leak-tight.
1:5
> If adjustments are required, repeat the check.
Providing for an inspection hatch (Diagram 22)
> The bathtub panel must be accessible and
removable for maintenance so that all vital
assemblies (pump, air blower and controls)
remain accessible.
Zeichnung
000000 # W-T- 000000 - 00 - 0
Drawing
Schematische Zeichnung mit Rohrunterbrecher
Spezial Ab-und †berlaufgarnitur mit Bodenzulauf
fŸr Badewanne
Special waste and overflow with base inlet
for bathtubs