Cooau CU-SPC02 Manual Del Usuario página 12

NAVIGATING WITH THE BUTTONS
Although your action camera is waterproof, the touch screen won't
work under water. Use the buttons to change modes and settings.
1. With your camera on, press the Mode button to scroll through the
modes and settings.
2. Use the Shutter button to select and adjust settings.
3.To exit: Press and hold the Shutter button for three seconds.
4.In video or photo mode, press Shutter button for three seconds to
enter video or photo menu.
5.In video or photo mode, press UP button to zoom in, press DOWN
button to zoom out.
6.In video or photo mode, press DOWN button for three seconds to
turn on or turn off audio record.
Testing waterproof case
Before using the waterproof case under water, please test whether it
is seal.
Below is the steps to test:
1. Remove action camera from the waterproof case Please don't put
the camera in waterproof case when you are testing. Otherwise, if
the waterproof case is defective, the water will enter the cam
2. Put some paper in waterproof case, then make sure it close tightly
3. Put the waterproof case under water for ten minutes
4. Take out the waterproof case from water, open it, to see if the water
enter it . After make sure the waterproof case is seal, you can install
the camera in it and use under water.
12