Tabla de contenido
STEP 2A Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall, must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
●
Stud center must be verified
1.
Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2.
Position the wall plate assembly
and mark the hole locations.
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be sure to drill into the center of the stud.
1
Max. 5/8 in.
(16 mm)
10
at your desired height and line up the holes with your stud center line. Level the wall plate assembly
14
2
Wood Stud Option
3
14
14
2 ¾ in. (70 mm)
7/32 in.
(5.5 mm)
Tabla de contenido
