English (Original Instructions); Product Specifications; Important Instructions; Fan Operation - DeWalt DXF2475 Traducido De Las Instrucciones Originales

English

PRODUCT SPECIFICATIONS

Model DXF2475
Power 220-240V / 50 Hz / 120W
Speed Stepless Speed
Weight 17 kgs
Power cord H05 -F, Cx0.75mm²/ 3.6m. Length

IMPORTANT INSTRUCTIONS

As with all electrical appliances, basic safety precautions
should always be followed to reduce the risk of electric
shock, re, or injury to persons, including the following
precautions:
Read all the instructions before using this fan.
• Use this fan only as described in this manual. Any
other use not recommended by the manufacturer
may cause electrical shock, re or injury to persons.
• Do not operate the fan with a damaged power cord
or after the fan malfunctions or has been dropped in
any manner.
• Use of extreme caution is necessary when any fan
is used by or near children, disabled persons or pets
and whenever the fan is left operating unattended.
• Do not place the fan on a small, unlevel, uneven or
any surface which might allow fan to tip or fall.
• For proper operation, fan should be placed on a
smooth non-combustible, level surface.
• Always unplug fan when not in use, when moving
from place to place, when assembling or disassembling
parts,and before cleaning.
• The use of attachments,or recommended or sold by
the manufacturer, may cause hazards.
• Do not use outdoors.
• Do not use fan in window. Rain may cause electrical
hazard (for non-window models).
• Do not operate the fan with blade guards or any safety
device removed.
• Do not run power cord under carpeting. Do not cover
cord with throw rugs, runners or the like Arrange cord
away from traf c area where it will not be tripped over.
• Do not insert or allow any object to enter any
openings on the fan. Doing so may cause electric
shock and/or re hazard. Avoid contact with moving
parts.
• This appliance is not intended for use by persons
(including children)with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. • Children should be supervised to ensure they do not
play with the appliance.
READ&SAVE THESE INSTRUCTIONS
WARNING: Shock Hazard
Use your fan only in dry environments. This fan is not
intended for use in a bathroom, laundry area, or similar
locations, or near sinks, washing machines, swimming
pools or other sources of water. Never locate fan
where it may fall into a bathtub or other water
receptacle. Do not use in damp environments such
as ooded basements.
WARNING: Hot Surfaces
Do not touch fan motor when in use. This motor is hot
when in use, to avoid burns, do not let bare skin touch
hot surfaces.
WARNING: Fire Hazard
Fans have arcing or sparking parts inside. Do not use
near combustible materials or ammable gases or
sources of heat. DO NOT USE in areas where gasoline,
paint or ammable materials are used or stored. To
prevent a possible re, do not block air intakes or
exhaust in any manner. Do not insert or allow foreign
objects to enter any ventilation or exhaust opening as
this may cause an electric shock, re, or damage the
fan.
WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug. Use with
adequate electrical system that is up to code.
WARNING: To Prevent Electric Shock
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock, check
with a quali ed electrician or service person if you are in
doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance-if it
will not t the outlet, have a proper outlet installed by a
quali ed electrician.
WARNING: To Reduce The Risk Or Electric
Shock
Do not use this product with any solid-state speed
.
control device.

Fan Operation

1. Fan Operation: Always operate the fan in the
upright position following all instructions and
recommendations listed in this manual.
2. Fan Location: Place the fan in the area of the
room that will provide proper fan cooling.
3. Fan Connection: Plug fan directly into 220-240
volt A.C., 50Hz wall outlet. Be sure plug ts tightly in
outlet. A loose connection may cause overheating
and damage to the plug or fan.
NOTE: To prevent overloading a circuit, do not
plug the fan into a circuit that is servicing other
electrical needs.
7