First Use; Battery Management And Charge - Jazz ULTRATAB C825 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1.8 Power Jack
One end of the AC adaptor can be inserted to the Power Jack and then the
charger is inserted to a standard AC wall outlet to charge the battery of the
tablet.
1.9 Reset
In case the operation of the tablet is interrupted for any reason, press Reset
button to reset and resume operation.
2. 2. 2. 2. First
First
First
use
use

First use

use

2.1 Battery management and charge

Prior to first use, make sure the battery is fully charged
To charge simply connect the adaptor or USB interface.
Charge for six hours for the first two times .Following that the battery need
only be charged for 4 hours.
【Remark】: This tablet has a Built-in type Lithium ion battery, To charge, use a
standard adaptor (Input: AC100~240V 50/60Hz Max:0.3A. Output: DC5V/2A).
Without adaptor, use USB cable to connect to micro USB jack of the tablet and
USB port on your computer to charge.
While charging, the battery icon will scroll. When charging is complete the
battery icon will become green and stop scrolling.
In order to prolong the service life of the device, let the battery deplete before
charging.
【Remark】: 1. Charge the battery at least once a month to avoid power
consumption caused damage.
2、After low battery shut down, connect the DC adaptor. While charging,
you will need to wait some time until the battery has enough power to switch on
and enter into main menu.
3. Device charging should be in standby status to reach normal charging
time; charging time may take longer if using the tablet during charging.
All manuals and user guides at all-guides.com
6
Tabla de contenido
loading

Productos relacionados para Jazz ULTRATAB C825

Este manual también es adecuado para:

Ultratab с1029

Tabla de contenido