Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Section 4: Operation
How to Use SprayTips
The quick-connect on the nozzle extension allows you to
switch between five different spray tips.The spray tips vary
the spray pattern as shown below (Figure 8).
CAUTION
NEVER exchange spraytips without lockingthe safetylatch
on the trigger.
Follow these instructions to change spray tips:
I.
Engagesafety latch on spray gun.
2.
Pull back collar on quick-connect and putl current
spray tip off. Store spray tips in space provided on
handles storage panel.
3.
Select desired spray tip:
For gentle rinse, select white 40 ° or green 25+
spray tip.
To scour surface, select yellow 15° or red 0 ° spray
tip.
To apply chemical, select black spray tip.
3.
Putl back on collar, insert new spray tip and release
collar.Tug on spray tip to make sure it is securely in
place.
4.
For most effective cleaning,keep spray tip from 8 to
24 inches away from cleaning surface. If you get spray
tip too close, you may damagecleaning surface. DO
NOT get closer than 6 inches when cleaning tires.
Cleaning
and Applying
Chemical
IMPORTANT:
Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump.
CAUTION
• Starting the engine without all the hoses connected and
without the water turned ON will damage the pump.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
To apply detergent follow these steps:
I.
Review spray tip use.
2.
Preparedetergent solution as required by
manufacturer.
3.
Hang detergent solution on "J" hook attached to
accessory tray, as shown in Figure 15.
\
i
I_Bm
Low Pressure
Black
High Pressure
V Y
White
Green
Yellow
Red
40 °
25 °
150
0o
t
Tabla de contenido
