TCL MS1G Guía De Instalación Rápida página 3

Connect the primary node
The first node you set up functions as the primary node, while
the rest are referred to as the secondary nodes.
1. Use the included Ethernet cable to connect a LAN port of
your modem or the Ethernet jack to the WAN port of any
node. This node is your primary node.
2. Use one of the included power adapters to connect the
primary node to a power source, the LED indicator lights
solid on. Wait about for 40 seconds.
The system completes startup when the LED indicator blinks
green. Place your MS1G on a stable position when using it.
Connect the primary node to the
internet
1. Go to the WIFI network list on your mobile device, select
the SSID of the primary node, and enter its password. The
SSID and password are specified on the bottom label of any
node,
2. Run the TCL WiFi App and follow the onscreen instructions
to connect the primary node to the Internet. After the
primary node is connected to the Internet, its LED indicator
lights solid green.
Desktop PC
LAN
TV
Game device
TCL_XXXXXX
EN - 3
TCL_XXXXXX
WAN
(CPE/Wi-Fi router/
XDSL/PON)
WPS/RESET
POWER
TCL_XXXXXX
TCL_XXXXXX