Airflow; Fan Speed; Zone Settings - Airzone ZBS Manual Del Usuario

Dry. Only available in direct expansion systems. The system works in dry mode, refreshing
the zone (reducing the humidity) when any of the zones is generating demand (T
T ).
room
Note: Dry mode decreases humidity in the room by entering the dehumidification cooling
cycle.
EN
Emergency Heat. This mode activates the Auxiliary Heat to provide heated air in case of
a mechanical failure in the system.
EN
Note: This mode is only visible when the installation includes an auxiliary heating device.

Airflow

FR
Select the control algorithm that best fits the installation. The available options are:
Silence. The fan speed is lower than in standard mode to reduce the noise.
IT
Standard. Default setting. The system automatically regulates the fan speed based on
the number of zones calling for cooling or heating.
PT
Power. The fan speed is higher than in standard mode to increase the flow.
DE

Fan Speed

It is used to set the airflow control of the AC unit fan. The airflow control is set in automatic
mode by default, imposing the flow depending on the number of zones in demand:
High speed
Low speed
Depending on the unit, enables to directly select the speed of the unit, setting the value
1 as the lowest speed. The speed is set as auto by default.

Zone settings

Press on the icon to access the parameters.
Name. Allows to change the name of the zone.
Timer. It is an auto power-off timer of the zone:
Off. Timer is not activated.
30. It activates the timing and switches off the zone after 30 minutes.
12
Medium speed
Automatic speed
<
Set-Point