Getting Started - Explore Scientific RDC8002 Manual Del Usuario

GETTING STARTED

INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AA (LR6)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
the display is dim.
CLOCK
CLOCK RECEPTION
1. When you insert or replace the batteries, RCC
reception is initiated. To manually start RCC reception
press the [ ] button.
2. The receiving process duration 7 minutes.
3. During receiving process, the RCC signal symbol
[ ] flashes.
4. If the RCC receiving process is successful, a
completed RCC symbol [
the display and the date and time will be set
automatically. If it fails within 10 minutes, RCC
] displays, or when
] will be shown in
setting will quit automatically. If that happens, press
the [ ] button to re-initiate RCC receiving.
5. RCC receiving will automatically start at 1:03, 2:03,
3:03, 4:03, 5:03 every night. Auto receiving function
will cease if it is successful.
6. To stop RCC reception, press and hold the [
button.
7. If the device is still not receiving the signal, please
proceed to set the time manually.
SET THE CLOCK MANUALLY
1. Press and hold [ SET ] button to enter into time and
date setting.
2. The setting parameter will flash.
3. Press [ + ] button once, the figure will increase 1
unit. Press and hold the [ + ] button, the figures will
increase rapidly.
4. Press [ –/C/F ] button once, the figure will decrease 1
unit. Press and hold the [ –/C/F ] button, the figures
will decrease rapidly.
5. Press [ SET ] button to confirm setting and enter to
next parameter.
6. Sequence of setting: zone  Year (2000 – 2099)
 Date format  Month  Date  Weekday
EN
IT
DE
]
FR
ES
7