ZUMEX ESSENTIAL Manual De Usuario página 38

Pin: The juice extractor has a PIN to allow you to access the counters. The program-
med serial pin is 0000, and can be changed.
In the TECHNICAL ASSISTANCE menu select PIN and press ON to confirm the selection.
If changing the pin for the first time, the serial pin number 0000 will be displayed.
Press ON and if you have already programmed a PIN, enter the old PIN, use the
cursors to select each digit, press oFF to change from digit to digit and ON to confirm
the pin. On entering the correct PIN, the words "New PIN" will be displayed. Program-
me the new pin, selecting each digit with the
digit to digit and then ON to confirm the new pin.
Counters: You can control the count up and count down devices installed in the
appliance. The count up device allows you to know the number of oranges processed,
and the count down device allows you to programme a specific number of oranges
for processing and gradually use up these oranges.
· Partial counter: This shows the number of oranges processed, and can be set to
zero. In the TECHNICAL ASSISTANCE menu select COUNTERS> PARTIAL COUNTER
and press ON to confirm the selection. Then enter your PIN (Note: Select with
the arrow keys
confirm the password). The number of oranges is displayed onscreen. To set the
counter to zero, press
counter set to zero onscreen.
· Total counter: This counter shows all the oranges processed during the life of
the appliance, and the number cannot be deleted.
In the TECHNICAL ASSISTANCE menu select COUNTERS> TOTAL COUNTER and
press ON to confirm the selection. The number of oranges is displayed on screen.
Press ON to return to the menu.
· Count down device: This allows you to programme a specific number of oranges
and gradually use them up. In the TECHNICAL SERVICE menu select COUNTERS>
COUNT DOWN and press ON to confirm the selection. Then enter your PIN (Re-
Directions For Use
38
All manuals and user guides at all-guides.com
each digit, press OFF to move from digit to digit and ON to
and confirm with ON, and the machine will display the
English
cursors, press OFF to change from