Playing Music Via Bluetooth - Akai CE7000-BT Manual De Instruccion

OPERATION
To connect previously paired Bluetooth device
1. Your Bluetooth speaker can store one previously paired device for quick
pairing during power on.
2. To connect a previously paired device after power on, if the previously paired
device is found with the range, the unit will pair the device automatically and
the STATUS indicator will turn to BLUE steadily. Two beeps will confirm the
pairing is completed.
To connect a new Bluetooth device
1. If no previously paired device is found with the Bluetooth range (10 metres)
after power on, the STATUS indicator would continue to flash in BLUE and
RED for 3 minutes before switching to standby mode.
2. During this period, you can pair a new Bluetooth device. Please follow step 3 to
5 in "To begin pairing with a Bluetooth device" section to complete the
pairing of a new Bluetooth device.
3. You can also start the pairing process manually by pressing and holding the
PAIR button on the unit until STATUS indicator would flash in RED and BLUE
alternatively again to indicate pairing attempt is in process.
NOTE:
•
Due to different operating system of Bluetooth devices, the time taken by pairing
process might be different. If the pairing cannot be successful in the first time,
please try to restart the pairing process by pressing and holding the PAIR button
again until the indicator light flashes red and blue alternatively.
•
The pairing time might be longer for the first time pairing or pairing a new
Bluetooth device.
•
Make sure you have the latest firmware for your Bluetooth mobile devices.
•
Make sure your device is working properly. Check your device's manual for details
on Bluetooth pairing and linking.

PLAYING MUSIC VIA BLUETOOTH

To listen to music streamed wirelessly from your paired Bluetooth device.
1. Follow the "PAIRING YOUR BLUETOOTH DEVICE" section to connect your
Bluetooth device.
2. Start the audio playback and adjust the volume output on your Bluetooth
device.
3. Press and release the PAIR button to pause the audio playback from your
Bluetooth device and press and release this button for resume the playback.
You may also pause and resume the playback on your Bluetooth device.
NOTE: It is not recommended to pause the audio playback by pressing and
releasing the PAIR button on the unit and then resuming the playback on your
Bluetooth device as it may have abnormal response for some Bluetooth
devices.
4. Use the Volume +/- buttons on the unit to adjust volume.
5. When done listening, press and hold the "
unit off (switch to standby mode).
All manuals and user guides at all-guides.com
" button for 2 seconds to turn the
9