Crivit SP-803Y Manual De Instrucciones página 41

RETENTION SYSTEM /SAFETY FASTENINg
Your motorcycle helmet is fitted with a high-quality retention system for optimal adjustment.
Proceed as follows to ensure the chinstrap is optimally adjusted:
• Put on your helmet and push the clip into the casing.
• The chinstrap must lie snugly against the neck and cheek.
• The helmet should not become dislodged if you pull it forwards/lift it up from the back of the neck.
If the helmet loosens even though you have pushed the clip all the way in, you need to tighten the
entire chinstrap.
• If the chinstrap is too tight, you must lengthen it. At least 5 notches on the ratchet should be
engaged.
• To open the lock, pull out the red nylon strap from the casing whilst pulling out the clip.
Replacement parts and clear and tinted replacement visors can be obtained from:
SPeQ GmbH · Tannbachstr. 12-14 · d-73635 Rudersberg
Hotline: +49 (0) 180/50 11 143 · e-mail: [email protected] · Internet: www.speq.de
All manuals and user guides at all-guides.com