Manual Time Setting; Alarm Setting - Techno Line WS 6820 Manual Del Usuario

DCF-TIME-SIGNAL AND SIGNAL STRENGTH DISPLAY
After the weather station has received the outdoor temperature from outdoor transmitter, it will start to
search for the DCF-time-signal.
When strong DCF-time-signal is detected, display shows with 3 bars
When weak or no DCF-time-signal is detected, display shows with 1 bar
weather station to another area for better reception or unplug the power jack to start reception of DCF-
time-signal again.
During reception, the signal strength may move from 1 bar to 2 bars to 3 bars. That is normal because
the weather station is detecting DCF-time-signal and other signals in the air at the same time.
If the clock does not receive DCF-time-signal within 21 minutes, it will stop to search for the DCF-time-signal.
During reception, press and hold the WAVE/HOUR button to stop the reception of DCF-time-signal.
Press and hold WAVE/HOUR again to return to reception mode and signal strength indication.
Press TIME button once to switch to normal time display.
Successful or failed reception
icon becomes static (stop blinking) when reception is successful.
icon disappears when reception is failed.
Automatic and manual reception
The weather station starts automatic reception everyday at 1:00, 2:00, and 3:00 o'clock. If it fails to
receive the DCF-time-signal until 3:00 o'clock, it will start again reception at 4:00 o'clock. If it fails
again, it will start again reception at 5:00 o'clock. If it fails again, it will start again automatic reception
at 1:00 o'clock at the next day.
To start manually the reception of DCF-time-signal press WAVE/HOUR button once anytime. The time
display will go to radio reception mode
Select time zone
Press TIME and SNOOZE button together, time display changes to 01. Release SNOOZE button and
keep pressing TIME button, then press MINUTE button to set the time zone:
00 = GMT + 0 hour (e.g. UK)
01 = GMT + 1 hour (Central European time e.g. Germany)
02 = GMT + 2 hours (Eastern European time e.g. Finland)

MANUAL TIME SETTING

Press and hold TIME button and at the same time press HOUR button once at a time to set the hour.
Press and hold TIME button and at the same time press MINUTE button once at a time to set the
minutes.
Note: The time is displayed in 24-hour display format.

ALARM SETTING

Press and hold ALM 1 or ALM 2 button and at the same time press HOUR button once at a time to set the hour.
Press and hold ALM 1 or ALM 2 button and at the same time press MINUTE button once at a time to
set the minutes.
Turn ON/OFF alarm 1 and/or alarm 2
To turn on alarm 1 only, press AL ON-OFF button. ALM 1 LED lights up on upper left of the hour digits.
To turn on alarm 2 only, press AL ON-OFF button again, ALM 2 LED lights up on lower left of the hour digits.
To turn on both alarms 1 and 2, press AL ON-OFF button again. ALM 1 and ALM 2 LED light up.
To turn off both alarms 1 and 2 permanently, press AL ON-OFF button again. Both ALM 1 and ALM 2
LED disappear from the display.
Note: Alarm duration is 5 minutes.
icon blinks. Time display shows 0:00.
.
.
or . Replace the