Leuze FBPS 600i Manual Del Usuario página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Safety
NOTICE
Ä
Observe the safety notices on intended use and foreseeable mis-
use in the operating instructions for the sensor.
You can find the operating instructions for the device on the Internet at
www.leuze.com. Download the operating instructions from the Internet:
Ä
Call up the Leuze home page: www.leuze.com
Ä
Enter the type designation or part number of the device as the search term.
Ä
The operating instructions can be found on the product page for the device
under the Downloads tab.
Intended use
The FBPS is an optical measuring system which uses visible red laser light of
laser class 1 to determine the position of the FBPS relative to a permanently
mounted bar code tape.
Areas of application
The FBPS is designed for positioning in the following areas of application:
– Electrical monorail systems
– Travel and lifting axes of high-bay storage devices
– Repositioning units
– Gantry crane bridges and their trolleys
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Ä
Only operate the device in accordance with its intended use.
Ä
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
Ä
Read this supplement and the operating instructions for the device
before commissioning the device. Knowledge of these documents
is required in order to use the equipment for its intended purpose.
CAUTION
Use only qualified bar code tapes!
To adhere to the intended use, only the barcode tapes approved by
Leuze are allowed.
EN
5
loading