Dmx Linking; Control Panel Description - Colorist LINE 6QA Guía De Referencia Rápida

Colorist™ Line 6Qa QRG

DMX Linking

DMX Connection
IP65 DMX Cable
Table
IP65 DMX
Connector Pins
Control Panel
Description
Passcode
All manuals and user guides at all-guides.com
The Colorist™ Line 6Qa will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.iluminarc.com.
The Colorist™ Line 6Qa uses a regular DMX data connection for its
DMX personalities: 4-CH, 6-CH, 10CH, 24CH, and 29CH. See the User
Manual to connect and configure for DMX operation.
Connection DMX (U.S.)
Ground
Data -
Data +
Male IP65 (DMX Input)
To connnect the Colorist™ Line 6Qa to your DMX network, it is
necessary to use the 3-pin to 5-pin adapters supplied with this
product.
When not using the Power Output, DMX Input or DMX Output
connectors, you must seal the cable ends with the supplied caps.
Button
Exits from the current menu or function
<MODE>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following passcode by pressing:
·
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
DMX (Europe)
Shield Shield
White Blue
Red Brown
F
emale IP65 (DMX Output)
Function
4
EN
IP65 Pin
1
2
3