Idiomas disponibles
Idiomas disponibles
Step 6
m
Step 7
40
30
20
10
0
HUMIDITY
m
E3
All manuals and user guides at all-guides.com
Steps 8-11
50
60
70
80
90
%
100
40
50
30
20
10
%
0
HUMIDITY
Usage:
When using this weather station outside, place unit in shaded area away from direct sunlight for most
accurate reading of gauges, as direct sunlight may cause some deviation in gauge readings.
Troubleshooting (Adjusting Gauges):
The various gauges contained in this product are calibrated to reflect the current atmospheric conditions
present during the time of this product's assembly. Vibration during the transportation of this product may
alter the preset readings and accuracy of each gauge. To ensure the proper reading of each gauge, it is
suggested that each unit be checked for accuracy before use. For accurate atmospheric measurements
refer to a reliable source such as the newspaper, television, radio, and/or the internet. If adjustment is
necessary, please follow the below instructions for each gauge:
1) Clock adjustment:
a) Remove round plastic cap to expose adjustment dial.
b) To adjust the Clock reading, turn adjustment dial to adjust needle on the face of the unit.
2) Temperature gauge adjustment:
a) Remove round plastic cap to expose adjustment dial.
b) To adjust the Temperature reading, turn adjustment knob marked "Temp" to adjust needle on the
face of the unit.
Note: Temperature gauge accuracy is +/- 2 degrees Celsius or +/-3 degrees Fahrenheit.
3) Humidity gauge adjustment:
a) To adjust the Humidity reading, turn adjustment knob marked "Humid" to adjust needle on the face
of the unit.
b) It is suggested that adjusting humidity gauge be done every six months.
Note: Humidity gauge accuracy is +/- 5%.
60
70
80
90
100
Remove round plastic cap to
adjust temperature
Installing and Replacing AA Battery for Clock
On back of clock, remove round plastic cap by pulling
metal ring. Snap off the battery cover located on the bot-
tom of the clock's gear box.
Insert battery matching the "-" and "+" markings, as
indicated on the inside of the battery housing, to
the markings located on the battery.
Replace battery cover by snapping cover
into place, and re-attach round plastic cap.
E4
Weather Station Adjustment Instruction Sheet
- AA 1.5V +
MADE IN CHINA
Adjustable Hole for Clock
Adjustable Knob
for Temperature
Adjustable Knob for Humidity
Battery Cover
MADE IN CHINA
- AA 1.5V +
MADE IN CHINA
Battery
