Idiomas disponibles
Idiomas disponibles
4. Using an end wrench or adjustable wrench, tighten the puller body by turning the flats
on the body clockwise. See figure p. The harmonic balancer will be pulled up snugly
against the end of the crank shaft. See figure q. When the balancer is installed tightly, turn
the adjustable wrench counterclockwise to loosen the tool and remove the puller center
screw assembly and puller body from the balancer. See figure r.
5. Using a ratchet and 12mm socket, remove the threaded adapter from the end of the
crankshaft. See figure s. Install and tighten crankshaft bolt to specifications.
Figure (p)
Figure (r)
4
Figure (q)
Figure (s)
