Tabla de contenido
7. Diagrama Eléctrico
36
3. Opera on
3.1 Procedure for opera on
Under no circumstances put your hands towards the blade to pushl the product to
be cut. For your safety, wear steel gloves.
With the machine turned off, adjust the Thickness Guide #.12 (Pic.01).
To operate the Mini Band Saw, ac vate the ON / OFF Switch #.03 (Pic.01).
Place the product to be processed upon the Sliding Table #.08 (Pic.01),
Push the sliding Table towards the blade #.06 (Pic.01) .
When returning take care to avoid the product to touch the blade back side ( flat side )
such preven ng the blade from ge ng out of the wheels
It is possible to cut the meat using only the sta onary table.
SIEMSEN HINT
To have an easy sliding movement of the meat on the sta onary table spray a litle
water on the table .
3.2 Cleaning
To clean the machine, firstly disconnect it from the power point. All the parts that have
contact with the meat must be cleaned.
Find below the descrip on of the procedure to take down the removable parts:
3.2.1 - To remove the Door:
Open the Doors and li them # 10 and # 13 (Pic 01) .
3.2.2 - To remove the blade:
Loosen the blade by rota ng the handle #.01 (Pic.01) counter clockwise and remove it
from the upper and lower wheels.
3.2.3 - To remove the wheels
Take off the loops # 09 (Pic.01) from the wheels and remove the wheels pulling them
towards the front side of saw .
IMPORTANT
9
Tabla de contenido
