IKEA UPPSPEL Manual Del Usuario página 6

Basic Setting:
Push the arrow down button until the legs have reached
the lowest position and keep pressure on the button for 6
seconds more. Upon certain errors, this must be done twice in
succession. Now the desk is in initial position.
Initialisation instructions:
Step 1. Continuously press the
seconds until the desk reaches its lowest position.
Step 2. Continuously press the
time until the display shows "RST".
Step 3. Continuously press the
time until the desk moves slightly downwards.
When the desk stops moving and the display shows "72", it is
ready to use.
Height Adjustment Controller
1
1. LED Display: Press any key once to wake up the LED display.
2. Up key arrow up: Press and hold to raise the desk.
3. Down key (Arrow down): Press and hold to lower the
desk.
4. Memory setting: +
• To save this current height: Press the button
display will show "S-", then press preferred memory
button , ,
this number.
6
arrow down button for a few
arrow down button a second
arrow down button a third
2 3
, , , :
, . This will bind the height to
4
• For Example, if you press
etc...
• Memory button
Note:
The desk's movement can be stopped at any time by pressing
any button.
Height settings will remain even if the desk's power is cut.
, the
, the display will show "S-1"
, , , .