Functions; Copy - U-Reach NV-BM Serie Manual Del Usuario

Functions

1.Copy

Step 1: Prepare source and target devices.
Recommendation: Target device(s)' capacity must be equal to or larger than
Note
the source device capacity.
Step 2: Connect source and target devices.
Step 3: Proceed to copy.
Scroll to select "1. Copy", then press "OK" to select which source to copy from. Scroll to
select "1.1 Source Port" or select "1.2 Internal Storage", then press "OK" to start the
duplication process.
The number of working/connected targets will be displayed on LCD. Press
Note
"OK" to start.
The following information below states what is displayed on the LCD during duplication.
Copy
Press ▲▼ together for 5 seconds to stop operation on the slowest device.
Note
Step 4: Copy Completed!
The quantity of passed or failed target device(s) and the copied duration will be displayed
on the LCD after duplication completes.
1.1 Source Port
Scroll to select "1. 1 Source Port", then press "OK" to copy to targets from the source port.
40.0G
3ready
Function
Copy x3
1:38 25% (4) 10.3G
Copied
Time & %
12
Total Data
40G
Slowest Copied
Port Data