Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Switching the heating function on/off
Note: The electric fireplace has 2 heating settings with different heat intensities.
•
Set the ON / OFF switch [5] to position I.
•
Set the switch for the first heating stage [6] to position I for low heat.
•
Set the switches for the first [6] and second heating stages [7] to positions I and II for high
heat. Note: The second heating stage only works if the switch for the first heating stage
[6] is set to position I.
ATTENTION! DANGER OF BURNING! Please
observe that the heat-radiating surfaces can
achieve temperatures exceeding 50°C. Ensure
the unit is switched off and cooled-down before
you touch it.
ATTENTION! Please ensure that the unit is not
covered with towels, curtains or similar objects,
this can cause overheating - always ensure that
the ventilation slots [4] are kept clear.
•
Flip the switches for the first heating stage [6] and the second heating stage [7] OFF in
order to stop heating.
•
In case of any doubt, use the ON/OFF switch [5] to switch the electric wall heater off, and
contact your dealer for further assistance.
13
Tabla de contenido
