Cleaning And Storage - FitEngine 08390 Manual De Instrucciones

Training with a Time / Distance
Target
The training computer (4) can be set to
enable you to enter a time or distance
target.
Once you have reached this target, the
training computer emits several beeps.
During the training, the upper section still
shows you all the data you want to see.
Setting a Time Target
1. Press the ON / OFF button for approx.
3 seconds to switch on the training
computer.
2. Press the MODE button. The TIME
display fl ashes.
3. Use the ▲ or ▼ buttons to set the target
time (01:00 to 99:00 minutes).
4. Start your workout. The TIME display
begins and counts backwards to
00:00.
5. Several beeps sound when the time
target is reached.
Setting a Distance Target
1. Press the ON / OFF button for approx.
3 seconds to switch on the training
computer.
2. Press the MODE button. The TIME
display fl ashes.
3. Press the MODE button again. The
DIST display fl ashes.
4. Use the ▲ or ▼ buttons to set the target
distance (0.100 to 9999 km).
5. Start your workout. The DIST display
begins and counts backwards to
0.000.
6. Several beeps sound when the dis-
tance target is reached.
The fast forward function can be
activated by holding down the ▲ or
▼ button.

Cleaning and Storage

PLEASE NOTE!
■ After each use, store the training de-
vice in a place where children cannot
use it.
■ Do not use any caustic or abrasive
cleaning agents or pads to clean the
training device. These may damage
the surfaces.
• Only clean the training device with a
damp, soft cloth and mild detergent if
necessary. Then dry all parts with a
dry, soft cloth.
• Store the training device away in a
clean, dry, frost-free place which is
protected from direct sunlight and
is out of the reach of children and
animals.
• We recommend that you use the tool
which is supplied to retighten the
screws on the training device now and
again as screws may become loose
from the device being opened up and
collapsed over time.
• To keep the water in the water tank
(14) fresh, add a cleaning tablet to the
water tank about every 6 months.
You can order new cleaning
tablets via our customer service
department under article number:
49605000010.
EN
17