Contents Of The Package - Snowfall SF1000MM Manual De Instalación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
EN - Installation and operation manual
SFD1000MM / SFD500MM / SF1000MM /SF500MM
Thank you for buying this fantastic Snowfall™ product.To take full advantage of all possibilities, it is recommended to read
these operating instructions very carefully.

Contents of the package

The Snowfall™ box contains the following components:
5x/10x Snowfall™ tubes (500/1000mm)
1x Snowfall™ 12V transformer with a Snowfall™ cable with a connector* and power cable with grounding
1x Snowfall™ End Plug
Transformer
* : Type 220/240V~12V. Insulated and suited for outdoor use and for maximum 20m of Snowfall™ tubes type SF500MM/SF1000MM/SFD500MM/SFD1000MM.
Adapter
F
eatures
Each Snowfall™ tube:
consists of 60/120/240 high efficiency LEDs with high brightness grade
is suited for indoor and outdoor use (IP44 and IP64 approved)
has a life span of 50.000 to 100.000 hours
has low power consumption.
The transformer can be directly connected to the 220/240V main supply.
Perfect for use in retail stores, commercial displays, decorative and street lighting and outdoor decoration.
Some important instructions
Protect the environment! Try to recycle the packing material as much as possible.
Keep this manual in a safe place for future consultation.
If you sell this unit, be sure to add this installation manual.
Don't use near strong magnetic fields and objects carrying high voltages.
The electrical installation should be carried out by qualified personal.
We strongly suggest NOT opening the unit, there are no user serviceable parts inside.
In the event of serious operating problems, stop using the unit and contact your dealer immediately.
Keep the system out of children's reach. This is not a toy.
Installation
Fasten all tubes, connecting cables and connectors.
The tubes are suited for outdoor applications but may not be used under water.
They have a temperature range between -15° ~ +40° Celsius or 5° ~ 104° Fahrenheit.
Connect the Snowfall™ cables to each other by using the supplied connectors. Make sure to tighten the plastic
fastening ring well. Attention: Please make sure that the polarization is correct. Connect male and female in the
right order! Look carefully for the slip in the connectors!
Connect the transformer to the 220/240V mains supply.
After carefully carrying out all the above mentioned steps, you can switch on the system.
Enjoy your Snowfall™ product.
IMPORTANT!
Use Hang up cables to hang the tubes. Do
not hang them by the electricity wires!
4
Tube
End Plug
Tabla de contenido
loading

Este manual también es adecuado para:

Sf500mmSfd1000mmSfd500mm

Tabla de contenido