Controls Description - Trevi PWB 44 Guia De Inicio Rapido

CONTROLS DESCRIPTION

1. ON/OFF key
2. DC IN socket for charging the power bank
3. DC OUT socket for device charging
SWITCHING ON/OFF THE POWER BANK
To switch on the power bank, press the key once (1), the icon will light up.
To switch off the power bank press the key (1) again and the icon will turn off.
CHARGING THE POWER BANK
To recharge the power bank use the USB-microUSB cable supplied, connect the cable
microUSB plug to the power bank DC IN socket (2). Connect the cable USB plug to a battery char-
ger (not supplied) fi tted with an USB port or to a device with an USB port (such as a computer).
During the charging operation will switch on the battery level indicator and blinks the led relative
to the percentage of charge.
When the battery is fully charged, the battery level indicator will turn off.
The time required for a full charge varies depending on the source used.
When charging is completed disconnect the power bank from the power supply source. A
connection extended over normal recharge time may damage the batteries and affect proper
operation of the power bank.
During a power surge from the charging source, the power bank automatically goes into protec-
tion mode, to resume charging disconnect and reconnect the power bank.
During the charging process the battery level indicator will turn on and the LED showing the
percentage of charge will fl ash.
CHARGING A DEVICE
To recharge an external device (smartphones, tablets, media players ...) use the USB-microUSB
cable supplied. Connect the microUSB plug to the device and the USB plug to the power bank
DC OUT socket (3).
Once connected, press the power key (1), the battery level indicator will light up and the external
device will signal the start of charging.
When charging is complete the power bank will turn off automatically.
The level indicator shows the percentage of charge remaining power bank; if while charging a
device the power bank's battery runs low, the light on the power key will start blinking and -after
a few minutes of low battery warning- the power bank will go in standby mode, interrupting the
charging process of the external device.
In case of excessive consumption of current by the external device, the power bank will auto-
matically stop charging. To continue charging, disconnect and reconnect the external device
and turn on the power bank.
TECHNICAL SPECIFICATIONS
Input voltage: .............5V DC
Input current: .............1000mA max
Output voltage: ...........5V DC
All manuals and user guides at all-guides.com
Output current: ...........1A max
Battery: 3.7V 4400mAh Li-Ion Internal
rechargeable battery
Size and Weight: ........105x60x25mm, 130g.