Team kalorik TKG SFC 1005 Manual De Instrucciones página 12

7. Window wiper: Caution! Do not operate this appliance directly on cold glass.
8. The window wiper must be attached to the scrubbing brush. First assemble the scrubbing
brush onto the appliance or onto the flexible hose. Take off the cloth from the scrubbing
brush and connect the window wiper to the brush by the two hinges. The window wiper
can be dismantled easily by unhooking the hinges again.
Window wiper
OPERATION:
1. Attach the appliance to the mains supply and the control lamp lights up. As soon as the
preheating (about 3-4 minutes) is terminated, the control lamp goes out.
Press the steam button and move the appliance slowly over the surface which is to be
cleaned. It is recommended that the distance between the nozzle and the surface
amounts to at least 2-3cm.
It is normal that the control lamp switches on and off during the process, since the
thermostat controls the heating element automatically.
CAUTION! THE APPLIANCE CANNOT BE TILTED OVER 45° DURING THE OPERATION. NEVER
DIRECT THE APPLIANCE TOWARDS HUMANS, ANIMALS OR PLANTS.
2. Refilling the water tank:
Unplug the appliance from the mains supply socket. Press the steam button and release
the internal pressure completely. Wait approx. 3 minutes and release the safety lid slowly.
After the appliance has cooled down to approximately the ambient temperature, fill the
water tank up to 2/3 full. Please use the provided funnel and the measuring cup. Close the
safety lid and attach the appliance to the mains supply again.
Warning! Before you release the safety lid, make sure that the internal pressure is
sufficiently reduced.
3. Descaling: in order to maintain the excellent quality and efficiency of your cleaner, we
recommend you to descale the appliance at regular intervals (once a month). Do not use
any vinegar or other descaler.
Scrubbing brush
Hooks
12
Hinges
Steam
button
TKG SFC 1000 - 131114