Indel Marine isotherm TB 32 Instrucciones Para El Uso página 9

isotherm tB 32
lOcATION
- Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must
not be used unsheltered, in the open air or exposed to splashing or rain.
- Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap of
at least 15 cm around the sides, back and top. Never use your refrigerator in the boot of a car or against
a seat or wall.
- Avoid placing your refrigerator near a heat source eg. a cooker, radiator or in direct sunlight. When using
your refrigerator at a picnic or camping site, be sure that it I s kept sheltered and in the shade at all times.
This helps the refrigerator to work more efficiently and keep the contents cool.
- Do not drape the refrigerator with any covering or block t he heat exchange grille.
WARNINg
- It is hazardous for anyone other than authorised service personnel to carry out servicing or repairs which
involve the removal of covers.
- To avoid the risk of an electric shock do not remove the cover of the mini cooler.
USINg ThE REfRIgERATOR IN A VEhIclE
- Connect the feeding cable to a direct current 12 or 24 V DC power source.
- Make sure the polarity is right.
- If you cut the plug, protect the line with a 15A fuse.
- If connected to an existing cigarette plug, carefully check up that power supply is sufficient
- The cables must have a suitable cross-section for their length, according to this table:
CABLE AREA
mm
2,5 (AWG 14)
4 (AWG 10)
6 (AWG 8)
ISOTHERM TB32A-00_14-03-2007
All manuals and user guides at all-guides.com
110/220v
50-60Hz
2
(AWG)
12/24 v
MAX CABLE LENGHT METRES (ft)
12V
5 (15)
8 (25)
12 (35)
ENGLISH
24V
8 (25)
12 (35)
12 (35)