Initial Use - auna Silver Star Mini Manual Del Usuario

INITIAL USE

• Before operation, please make sure that the VOLTAGE mentioned on
the power supply is same as the voltage of your local area.
• Use the supplied mains adaptor to connect the device to a household
mains socket.
• Switch the device on with the power switch on the rear.
When it is the first time running the device, the system will ask you to
•
set Language and Network Configurations. You may setup the network
connection immediately, or set it later. Use Navigate to select the
desired option. Press Navigate/OK to confirm.
• Press Standby button when unit is power on, unit will go to standby
mode. Press again will make it on again.
Network configuration
Normal network configuration
1
Select "Yes" for the normal Wireless Network Configuration: Then
select the required AP by turning" Navigate" and confirm it by pressing"
Navigate/OK".
Enter WEP or WPA code to connect the WiFi network by select the
correct character turning the "Navigate/OK" button.
Press button to select the next character.
In this condition, press button you can turn left and delete the left
characters at the same time: when the password is complete please
press" Navigate/OK" button to confirm.
EN
13