Ryobi P782 Guia De Inicio Rapido

NOTE: These instructions supplement the Maintenance Section in
your operator's manual. For complete operating instructions, refer to
page 9 of the Operator's Manual.
WARNING:
This insert sheet is not a substitute for reading the operator's manual.
To reduce the risk of injury or death, user must read and understand
operator's manual before using this product.
ADJUSTING THE LOCK CLAMPS
See Figure 11, page 11.
The lock clamps may become loose and move over time. If
neccesary, close and reposition the clamp then use a 3 mm hex
key to tighten the cam and secure the clamp in place. Open and
close the clamp to ensure it is functioning properly.
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 • www.ryobitools.com
HYBRID TRIPOD
STAND LIGHT
P782
Fig. 1
A A
A - Cam (came, leva)
B - Lock clamp (bride de verrouillage, mordaza
C - Hex key (clé hexagonale, llave hexagonal)
B B
C C
de aseguramiento)
998000693
6-16-21 (REV:01)