4.
Tap to select your Wi-Fi Network from the list. NOTE: the IP 2K Camera
4
will only work on 2.4 GHz frequency.
5.
Enter your Wi-Fi Password and tap the Save icon (top of the screen)
5
to continue.
6.
For both setup options once the camera is connected you will see the
6
Add successfully screen. Tap Start Preview to open the app.
NOTE: If you used a hard wire connection to get started, once the
camera has been connected to the app, you can disconnect the
Ethernet cable and use your Wi-Fi connection.
For the full product manual and support videos visit www.DEFENDER-USA.COM/SUPPORT
