Operation - Steinbach 061205 Manual De Instrucciones

C-A: Setting for most pools (standard setting)
B-C: Setting for large pools
B-A: Setting for small pools
1. Press the retaining lug away from the half axle
and pull off the wheel.
2. Insert in the wheel with the catch so that it
snaps into place at the respective letter for the
selected setting.
The wheels are set.
Attaching the cleaning strips
Cleaning strips can improve the cleaning of your pool, depending on the conditions on site, such as
15
type and quantity of dirt or surface structure of the bottom. Only operate the device with the cleaning
strips attached if this leads to a better cleaning result.
1. Insert the cleaning strips
channels on the bottom of the bottom part
2. Make sure that the cleaning strips
properly engaged and have a tight fit.
The cleaning strips are attached.
Detaching the cleaning strips
1. Pull on the frames of the cleaning strips
The cleaning strips are detached.

Operation

Do not operate while swimming! Mortal danger!
Hair or clothing can be sucked in or trapped by the cleaning element, hold persons under
water and, in extreme cases, prevent them from resurfacing.
- Never operate the device while there are persons in the pool.
- Prevent any access to the pool as long as the device is in operation.
Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts function?
- Are the accessories in perfect condition?
- Are all cables in perfect condition?
Do not start up a damaged device or damaged accessories. Have them checked by the manufacturer or
its customer service or a qualified service technician.
24
into the suction
15
.
3
have
15
and take them out of the bottom part
15
WARNING!
4
5
3
15
.
3