JOYTECH 9200 Manual Del Usuario página 5

4) Rotate the bosses on the Monitor Mount so they are in the vertical
position. Hold the Monitor and align the connections to the bosses on
the Monitor Base. Press down firmly so the Release Buttons on the
rear of the Monitor click. The Monitor is now locked on the Monitor
Base.
Note: Attempting to attach
the Monitor to the Monitor
Base at an angle could cause
damage. Always make sure the
Monitor is connected straight
and locked firmly in position
before use.
5) Connect the Monitor AV Connector to the
AV port on the rear of the Xbox 360™ console.
6) Fully insert the Power Adapter supplied with
the Monitor into the Xbox 360™ console.
All manuals and user guides at all-guides.com
7) Fully insert the Microsoft Xbox 360™ power
supply cord into the Power Adapter.
8) Connect the Power Adapter Link-Cable
between the Power Adapter and the DC IN
12V connector on the Monitor Mount.
9) Press the ON / Standby button on the Xbox
360™ console and then the Monitor.
Removing the Monitor from the
Monitor Base
1) Make sure the Monitor and Xbox 360™ con-
sole are switched off. Slide both of the Release Buttons on the rear of
the Monitor.
Note: Always make sure the Monitor is removed from the
Monitor Base in a linear motion. Twisting the Monitor could
cause damage.
2) While holding the Release
Buttons, carefully lift the Monitor
to remove it from
the Monitor Base.
ENGLISH 3