Idiomas disponibles
Idiomas disponibles
C3. LED indicator:
(Green: fully charged; Red: charging the speaker.)
4. Basic operation
a. Turning on/off the unit.
Press the Standby/on
button on the top panel of the unit to turn on the unit, and then the
power indicator around the power button will light up. Press it again to enter standby mode
(switch off). Rotate the volume controller on the bottom of each speaker to turn the speaker
on and adjust the volume level as desired. Place the left on the left-hand side of the speaker
base and right speaker on right-hand side as per the "L" and "R" marking on the bottom of
each speaker.
The sound comes from two speakers, which have a rechargeable lithium battery built-in with
an individual amplifier. The wireless function will automatically be activated as soon as the
speakers are removed from the base station allowing you to enjoy the music in any room in
your home (subject to distance and obstacles)
b. Charging the wireless speakers.
Switch each speaker off by rotating the volume control on the speaker to the lowest volume
level (a click will be heard when this has been performed successfully and the blue light
behind the volume control will switch off).. Charge your speaker by returning the speaker to
it's position on the base station. Charging will begin automatically and the speaker LED will
appear red to confirm a connection has been established. When the LED indicator is lit up in
green that means that the speakers are fully charged.
Note: The speakers are equipped with a built-in rechargeable lithium battery; battery life
varies according to factors such as the volume level amount of use and the wireless
operation. After charging, the speakers can be used for up to 3-4 hours at medium volume.
When you are going to charge your speakers for the first time, the charging time is about 4
hours; subsequent recharges will take about 3 hours. DO NOT OVERCHARGE-
Overcharging may damage the rechargeable batteries or limit battery life. Please disconnect
the product from the mains supply if you are not planning to use the product for a long
period.
12
All manuals and user guides at all-guides.com
c. Volume- /+ button
Press the VOLUME-/+ button on the unit to adjust sound level.
5. Listening to AUX
You can listen to the sound of a connected external audio device through your wireless
speakers. Connect one end of 3.5 mm plug signal wire (included) to the AUX IN socket at
the rear of the base station, and the other end to your audio equipment (MP3, PC, CD
player, etc). Run equipment as normal.
Adjust the volume-/+ level as desired.
Note: AUX in will not work when an Media player is connected.
6. Listening to media player (not included)
This unit can support various models of media player , such as Mini media player, media
player photo, media player video, etc. It can also act as a battery charger for your media
player. You can listen to the sound of the docked player through the powerful wireless
speaker system.
Operating media player with the main unit.
a. Insert an media player to the main unit carefully, (as shown) press the power button on the
top panel of the unit to turn the unit on. Select your desired music, photos, or videos, etc,
and play the connected media player as usual.
b. Press the VOLUME-/+ button on the unit to adjust sound level. Then you can take the
13
