CEEK 4d Advanced Guia De Inicio Rapido página 4

Basic function/
Operation
for bluetooth
Power
Buttom
Disconnected
Disconnection due being out of
bluetooth signal range.
Blue LED flash 1 time in 3 seconds
Disconnected
Low Battery
Low battery warning: when voltage
drops to 3.3v.
Red LED flashes slowly
Dodidodido per 1min
Auto Power
Auto power o due to disconnected
time up to 10min.
Charging
Headphone will turn o
automatically once charging start.
Solid red
Touch control instruction (Right side panel of headphone):
Touch then sweep according to directions below.
Power on
Press and hold for 3s when
headphone power o .
Blue LED flashes 3 times
Power on
Power o
Press and hold for 3s when
headphone power on.
Blue LED flashes 3 times
Power o
Pairing
Press and hold for 5s~7s
when headphone power o .
Red and blue LED fast
flashes alternately
Pairing
Pairing successfully
Blue LED flashes 1 time in 7s
Connected
No pairing,or pairing failure
Blue LED flashes 1 time in 3 seconds
Connected
Auto re-connect
Headphone will reconnect the last
connected device automatically after power
on and the device in operation range.
Connected
Auto Power
Auto power o due to voltage
drops to 3v.
Goodbye
Full charged
(Voltage=4.2V) Full charged
Solid red
Vibration controller
Adjust vibration intension
Dial up or down