IKEA UPPSPEL Manual Del Usuario página 6

Reset process:
Step 1: Press/hold the down button for a few seconds until the table reaches
its lowest position.
Step 2: Press/hold the down button a second time until the display shows
"RST".
Step 3: Press/hold the down button a third time until the table slowly lowers.
Once the table stops moving and the display shows "72", your desk is ready to
use.
Lock/Unlock controller:
Lock the controller: Press and hold the
display shows "LOC".
Unlock the controller: Press and hold the
display shows the actual height of the table.
Error Code Instructions
Error Code Reason
E01 Overcurrent protection/short circuit
E07 Motor line open circuit error
H01 Over-heating
RST Power failure
888/000 Controller error
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling
in accordance with local environmental regulations for waste disposal. By
separating a marked item from household waste, you will help reduce the
volume of waste sent to incinerators or land-fills and minimise any potential
negative impact on human health and the environment. For more information,
please contact your IKEA store.
6
symbol for 10 seconds until the
symbol for 10 seconds until the
Solution
See instructions for Reset/Initialisation.
See instructions for Reset/Initialisation.
Unplug from the wall socket and re-plug – or wait 18 minutes to let the
motors cool before using them again.
See instructions for Reset/Initialisation.
Please contact IKEA Customer Service.