Troubleshooting Guide - SEELEY INTERNATIONAL TBA Serie Manual Del Propietário

TROUBLESHOOTING GUIDE

PROBLEM – Wall Control flashes "SERVICE"
CAUSE
1. An operational fault has been
detected
PROBLEM – Inadequate Cooling
CAUSE
1. Pump not working correctly
2. Dry pads.
3. Leaking ducts
PROBLEM – Unpleasant Odour
CAUSE
1. Odour from new pads.
If your wall control display flashes "Service" or should you consider that your air cooler requires
service, you should contact your local Dealer.
When you contact your Dealer regarding service or warranty please quote the unit model number
and serial number as shown below.
Model No.................................
All manuals and user guides at all-guides.com
displayed on the screen. Quote this number to your
Service Agent.
Impellor may be jammed or obstructed.
Check salinity sensor correctly installed Rectify fault or
replace pump.
Inspect fitment of distributor cap.
Check for blocked or kinked hose. If blocked, dismantle,
clean and flush or unkink the hose.
SEELEY INTERNATIONAL – OWNER'S MANUAL
ACTION
Ensure the water supply is turned ON
Check the cooler drain pipe is not blocked.
Turn OFF the Wall Control and record the number
ACTION
Check plug, wiring and circuit breaker.
Check water flow to pads.
Find leaks and seal.
ACTION
Allow time to condition by running the air cooler
Serial No.....................................
11