Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Install hitch – Slide in the hitch brackets though end panel opening into frame rails. Using pull wires ⑤ feed carriage bolts ① and spacers ② into the slots of hitch
brackets through end panel opening and then through the frame rail holes per side, see Figure 1. Remove pull wires and loosely install conical washers ③ and hex nuts
④ to the frame rail, see Figure 1.
©2021 Horizon Global™ Corp - Printed in Mexico
Sheet 7 of 24
76545NP
07-28-21
Rev. A
Tabla de contenido
