Raymond Weil GENEVE Manual Del Usuario página 17

All manuals and user guides at all-guides.com
Resetting to Zero
Press push-button B in order to reset all the chronograph counters
to zero. Your watch is now ready to start timing again. Resetting
to zero is only possible once the chronograph has been stopped.
Intermediate Timing
Press push-button A to start the chronograph. Then press
push-button B to obtain the first intermediate time. While the
chronograph is stopped, the activity continues to be timed. Press
push-button B again to allow the chronograph hands to make up
the time elapsed since the first stop. Press push-button A to stop
the chronograph and read off the total time. Press push-button B
to reset to zero.
If one or several of the chronograph hands are not in their exact
starting position, it is necessary to adjust them. Therefore pull the
crown out to position 3. Press push-buttons A and B simultaneously
for at least 2 seconds. The chronograph seconds hand then rotates
through 360° and the correction mode is activated. Next, press
push-button A to adjust the seconds hand (a short push to adjust
step by step, or a long push for continuous adjustment). Then press
push-button B to pass on to the following hands (1/10 second, then
minutes) and adjust them as previously explained. Push the crown
back in to position 1 when adjustment is completed.
17