Metra Electronics Axxess Integrate AX-HYKIACAM-1 Instrucciones De Instalación

Installation Instructions for AX-HYKIACAM-1
AX-HYKIACAM-1
Hyundai / Kia (with NAV)
2014-2017
INTERFACE FEATURES
• Retains the factory back-up camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen
INTERFACE COMPONENTS
• AX-HYKIACAM-1 harness
APPLICATIONS
HYUNDAI HYUNDAI (CONT)
Elantra 2017 Tucson
Veloster
Elantra GT 2016-2017
Genesis Sedan 2016
KIA
Santa Fe 2017
Cadenza
Santa Fe Sport 2017
Forte
Sonata 2015-2017
Niro
TOOLS REQUIRED
• Wire cutter • Crimping tool • Solder gun • Tape
• Connectors (example: butt connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
® axxessinterfaces.com • metraonline.com
Axxess Integrate
REV. 4/13/17 © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
KIA (CONT)
2016-2017 Optima 2016-2017
2016-2017
Sedona 2015-2017
Sorento 2016-2017
Soul 2014-2017
2017
Sportage 2017
2017
2017
Installation Instructions for AX-HYKIACAM-1
Connections to be made
The AX-HYKIACAM-1 can be connected two different ways
To retain the factory back-up camera to an aftermarket radio:
• Connect the Black wire to chassis ground.
• Connect the Red wire to accessory power.*
• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
* It is highly recommended to use the AX-CAM6V (sold separately) to provide the
camera with the proper voltage.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the Black wire to the aftermarket cameras ground wire.
• Connect the power wire of the aftermarket camera to accessory power.
• Connect the female Yellow RCA jack to the aftermarket camera.
• Tape off and disregard the following (1) wire, it will not be used in this application: Red.
Note: Disregard the loose Green/Purple wire, it will not be used in this application.
K P
NOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
® axxessinterfaces.com • metraonline.com
Axxess Integrate
REV. 4/13/17 © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Metra recommends MECP
certified technicians