Low battery alert
If the battery charge is too low, parts of the LCD display flash. Press any
button to turn off the power and replace batteries.
An exhausted battery may leak and damage your radio or cause weak,
distorted or whistling reception. Replace batteries when required. When you
will not use your radio for an extended period of time, remove the batteries.
• Do not attempt to recharge, short-circuit, disassemble, heat, or throw the
batteries into a fire.
• Do not mix battery types (e.g. alkaline with zinc carbonates).
• Do not mix old and new batteries.
• Weak batteries can leak and severely damage the arm band radio.
• Dispose of batteries according to local environmental laws.
Using the arm strap
To connect the arm band to your radio:
1 Insert the arm strap through the hooks of the clip.
2 Press down one end of the Velcro
3 Insert the clip into the back of your radio, then slide the clip to lock it in
place.
To release the arm band from your radio:
1 Press the lock.
2 Slide the clip in to release the arm band.
4
NS-R4111 Arm Band Radio
®
piece to secure it in place.
Press
Direction of lock
Press the lock to release the clip
Direction of release
www.Insignia-Products.com