AD Instruments AD6236P Manual De Usuario página 16

_______________________________________________________________________________
automatically switch to display max value/ min, value / last value.
(more difference of data value, less data stored)
Eg.: the displaying is "An 64" when 64s of measuring data is stored
in one measuring(see fig.3). The tachometer will display the
stored data in turn by pressing the memory button. The first
value is 350.3RPM and the second 317.1RPM, analogically the
th
64 value is 337.0RPM (see fig.4).
Reminds: The contact line button do not stores max value /min
value and measuring data but last value. All data will be
canceled and the tachometer will start to measure and store
data again if measuring button is pressed when looking over
measured data.
4.
Battery replacement
When it is necessary to replace the battery(battery voltage less tan
approx.4.5V), will appear on the display.
Slide the battery cover away from the instrument and remove the
battery.
Install the batteries into the case permanent damage to the circuit
may result form incorrect installation.
©Copyright Abacanto Digital SA.
Manual de usuario AD6236P
AD Instruments
16