Whalen NOLAHBST Guia De Inicio Rapido página 3

Ø1/4" x 1-3/8" Bolt
(4 used in this step)
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Position the Seat with Backrest (A) upside down on the carton or other protective support surface.
NOTE: Place a protective cover (like the bubble wrap packing material) over the carton or other support
surface to prevent from scratching.
3. Pick up the Base (B) and turn the upper plate of Swivel Plate 45 degree across the bottom plate.
4. Flip the Base (B) upside down and align the upper plate holes of the Swivel Plate with the threaded
inserts on the Seat Frame (A). Make sure that the top frame of the Base (B) aligned with Seat Frame (A)
properly.
5. Insert four 1-3/8" Bolts (1) with Lock Washers (2) and Flat Washers (3) through the swivel plate holes
and screw into the Seat Frame (A). Fasten all bolts with the Allen wrench.
6. Stand the stool upright.
Assembly Instructions
Lock Washer
(4 used in this step)
①
3
Flat Washer
(4 used in this step)
② ③