AGPtek SW10 Manual Del Usuario página 5

1. Take off the watch charging holder part. It
needs to be pushed up from the bottom
when it is removed.
2. Install the watch charger into the holder,
then wrap the charging cord around the
cable slot and fix it. The USB port is exposed
from the slot at the bottom.
3. Place the holder with watch charger back to
its original position. It should be aligned with
the slot and pushed down from the top to
secure the holder part. In addition, ensure
that the USB plug is fully inserted into USB-A
port.
4. The installation is complete.
Notice
1. For the fast and safe charge, please use a
Quick Charge 2.0 or 3.0 Wall Charger.
2. All devices supporting wireless charging
function, can use the product to charge.
3. Charging time (Wireless) VS Charging time
(Wired): The power of wireless charging
stand is 15W max (iPhone supports max.
7.5W power, and most Android phones
support 10W power), but the power of wired
charger is at least 10W. Thus, the wireless
4